Accelerometer Clip

This clip makes handling the accelerometer easier while preventing backward mounting and the threaded cable connection from coming loose. It was designed to be light enough not to affect the measurement.

Installation:

Make sure the cable it tightly screwed into the accelerometer.
Verify the marked side of the accelerometer is on the inside of the clip, exposing the blank side.

3. Point the top of the accelerometer into the top pf the clip at an angle.

4. Press down on the cable connection to snap it into place.

Add wax and use clip to affix accelerometer on to the cutter.

To remove, push the clip to the side to snap it off. Do not pull straight off.