UPDATE: Use the Simple Milling module for the minimal data required to generate a usable Dashboard: https://mli.supportbee.io/2770-millmax-support-center/6000-new-features/19920-new-features-july-2023 The minimum data required are now highlighted in red in the opening Details window of the machine,...
UPDATE: Use the Simple Milling module for the minimal data required to generate a usable Dashboard: https://mli.supportbee.io/2770-millmax-support-center/6000-new-features/19920-new-features-july-2023 If you are trying to get to an answer quickly and you do not have the tool information follow the i...
We fixed a glitch where the condition indicated yellow at the highest RPM when the dial showed red.We have added a TROCHOIDAL milling selection under SETUP. This is for high axial and low radial (10% or less) engagement applications. We have created a new algorithm for these types of tool paths.The ...
If the accelerometer is mounted backwards, MillMax will detect it after the tap-test test and provide this warning.If any required data field is missing, you will receive a warning before publishing a bad Dashboard:You can now set the maximum recommended width of cut as a percentage:The resulting Da...
For fixtures and large tools 4"+ and long projections.Hammer 086D05 $805.00 (use MillMax hammer cable)Accelerometer 353B14 $365.00 Cable 003C10 $59.00
This clip makes handling the accelerometer easier while preventing backward mounting and the threaded cable connection from coming loose. It was designed to be light enough not to affect the measurement.Accelerometer ClipInstallation: Make sure the cable it tightly screwed into the accelerometer. Ve...
This large hammer tip is for use on carbide endmills, especially smaller diameter where targeting a small spot on the endmill is difficult or larger endmills when there ont a smooth even surface to strike. This will prevent double hits and mishits. Don't use this on indexable endmill and face mills....
If you have challenges with physical act of tapping, such as, frequent double hits or difficulty hitting the target, this add-on gandle may be of help.The tap test hammer can present some biomechanical challenges due to the three main nerves controlling the hand, wrist and arm. From on a 2017 study ...
Accelerometer Cable ReelPosition magnetic clasp like this and place in notchesStart winding cableBring magnetic clasp around cable Insert accelerometer into one of the slots in the two spindles. Wrap the magnets into the notches and attach together in the back. Wind the cable around the two reels (f...
We are starting to see increased incidents of hammer cable failures. We have tried dozens of cable reels for the hammer cable. The cable is very stiff and has significant memory making it very prone to tangling and challenging to wind. If the cable is not carefully untangled and pulled on it can cau...
UPDATE: If you enter 45 degree as the lead angle in the tool details, the cutting stiffness of the workpiece material will adjust automatically.When tap-testing indexable endmill or face mills with a 45 degree lead, select the Special 45 Lead material database from the drop down BEFORE selecting a m...
UPDATE: If you enter a lead angle less than 90 degrees in the tool details, the cutting stiffness of the workpiece material will adjust automatically.When tap testing high feed cutters, select the Special High Feed material database from the drop down menu BEFORE choosing a material.
These are the components in the MillMax upgrade kit:Accelerometer Clip - https://mli.supportbee.io/2770-millmax-support-center/6000-new-features/19416-accelerometer-clip Large Hammer Tip - https://mli.supportbee.io/2770-millmax-support-center/6000-new-features/19417-large-hammer-tip Cable Reel - htt...
CUSTOM SAVE AS We have received requests to be able to save MillMax files with custom names rather than use the default automated file naming. To save a file with a custom name do the following:1. Click CTRL and A together.2. Click the "Save Current File As" button.3. Name your file and click "Save"...