In most cases, if we stabilize the milling tool, workholding vibration issues go away. If there is still chatter present at a stable speed according to the Dashboard, first use the Harmonizer software to measure the part vibration and calculate a new speed. Alternatively, tap test the tool and generate a Dashboard. Using the same tool settings, tap test the part in the x and y directions, moving the accelerometer to be directly across from the hammer impact, or as close as the part will allow. Generate a Dashboard for that file. Find a stable speed, width and depth of cut that is common to both Dashboards. If the part Dashboard is all green at all speeds and depths of cut, part vibration is not an issue.
Here is an an example:
Use Virtual Runoff to compare the tool and workpiece Dashboards. Load both dashboards into Virtual Runoff and click the check box to lock the speed adjustments. Find a speed that is green for both the tool and the workpiece.